Click Here

 

Nearly everybody maintains their unique assumption on the subject of What Would Cause My Electric Water Heater to Stop Working?.

Many modern-day residences take advantage of an electric hot water heater for their heating system, as a result of its convenience and simplicity of use. Nevertheless, similar to any other electric appliances, problems might arise with its use, unexpectedly. It can be truly frustrating to awaken to a cold shower rather than a hot one or having your bath with water that isn't hot enough and even as well hot. Whatever the case may be, hot water heater problems can be rather stressful. Fortunately, we've made a listing of feasible remedies to your hot water heater concerns. There are a number of factors that could cause much of these troubles, maybe a concern with the power supply, the electric burner, or the thermostat. Before doing anything, ensure you turn off the main power supply for safety. Whatever the trouble is, getting it fixed need to not present excessive of an issue if you follow these actions:

 

Call An Expert:

If after replacing all damaged parts and resetting your temperature, the water heater still isn't working, you might need to get in touch with an expert plumber for a professional viewpoint. The trouble with your heater could be that the cold and hot faucets have been changed or it might be undersized for the quantity of warm water required in your house. Whatever the situation may be, a professional plumber would certainly assist resolve the trouble.

 

Check Your Power Supply:

As basic as this might appear, it is very required. Without ample power, your hot water heater will not work. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Examine if the fuse is blown out or the circuit breaker tripped. If the circuit breaker is the issue, just turn it off and on again. Change any kind of busted or damaged fuse. Evaluate the home appliance with power after these adjustments to see if it's currently functioning.

 

Inspect Your Thermostat:

If your water heater still isn't working or the water coming out isn't warm enough, you might need to examine the temperature setups on your top thermostat. Make sure the circuit breaker is turned off before doing anything. Open up the gain access to panel as well as press the red button for temperature reset above the thermostat. This must assist warm the water. Transform the breaker back on and inspect if the trouble has been fixed.

 

Examine the Heating Element in the Hot Water Heater:

If it's not a power trouble, after that attempt checking out your burner if it is still working. Check each of your burner to be sure the issue isn't with any one of them. If any one of them is damaged, change that component and then check whether the hot water is back on.

 

Conclusion

Water heater problems are not always significant. A lot of them are due to minor issues like a blown fuse or damaged burner. Replacing the defective parts should suffice. Nevertheless, if you are still not able to solve the trouble, give a call to your nearby plumber to find to get it fixed.

 

Common Reasons Why Your Hot Water Heater Isn’t Working

 

Water Gets Too Hot

 

Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.

FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.

 

Water Doesn’t Get Hot

 

This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).

FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.

 

Leaking Water Heater

 

A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.

FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.

 

Noisy Water Heater

 

Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.

FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.

 

Pilot Light Keeps Going Out

 

Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.

FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.

 

Water Smells Bad

 

The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.

FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.

 

Water Looks Brown Or Rusted

 

The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)

FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.

https://www.huskyair.com/blog/hot-water-heater-isnt-working/

 

Do you appreciate reading about No Hot Water — Water Heater Repair? Leave a review directly below. We'd be interested to listen to your suggestions about this posting. We are looking forward that you come back again in the near future. Loved our article? Please share it. Help another person check it out. Thanks for your time. Come back soon.

Appointment